24/7 Emergency Service in Ohio Valley


Schedule Online


How to Clean a Shower Head

How to Clean a Shower Head

Your shower head can get clogged from mineral deposits, soap residue, and other debris. A clogged shower head may spray water unevenly and leave you with low flow.

When your shower head becomes clogged, it’s necessary to clean it properly and get it back to peak performance.

Follow these steps to clean your shower head and enjoy a powerful stream of water.

Step 1: Remove The Shower Head

Turn the top section of the shower head in a counter-clockwise direction to remove the shower head. If your shower head is stuck, wrap the top section with a rag and gently turn it with a wrench.

Step 2: Disassemble The Shower Head

Once you’ve removed the shower head, the next step is to disassemble the smaller ball joint area that attaches to the pipe and access the screen and gasket.

Step 3: Remove The Flow Restrictor

If your shower head has a flow restrictor, use a needle-nose pliers or pliers to grab the side of the flow restrictor and pull it out.  

Step 4: Clean The Shower Head Parts

Pour some warm water in a container and add calcium, lime, and rust remover to the water. Immerse the shower head parts into the solution. Let the parts soak in the solution for two minutes.  Once you’re done, rinse the shower head parts thoroughly in cool, fresh water.

Step 5: Rinse The Shower Head Parts and Clean Them Using a Toothbrush

Use a clean toothbrush dipped in dry baking soda to scrub the flow restrictor, gasket and screen. Place the shower head in an upside-down position and gently tap it so that mineral deposits and other debris may fall out. Focus on the areas around the holes where water comes out. Do not use a hard-bristle brush on shower heads with a chrome or protected metal finish.

Step 6: Reassemble The Shower Head

After you’ve rinsed your shower head, reassemble it and screw it back in place. Lastly, turn on the water and test out the water flow.

You can go ahead and polish the shower head with a soft cloth to achieve a finished look.

CAUTION: Do not use bleach to clean your shower head as it can lead to the production of harmful bacteria in your showerhead.

Need Help with Cleaning Your Shower Head or Shower Head Repairs? Get in Touch with Mr. Rooter Plumbing

If you’re dealing with a clogged or faulty shower head, do not put off calling an experienced plumber to help you with shower head cleaning or repairs.

A clogged or faulty shower can be dangerous and an inconvenience. That’s why you should call a reliable plumber in Follansbee, WV as soon as possible to make repairs.

Mr. Rooter Plumbing is one of the reputable plumbing companies you can rely on for all of your plumbing needs. Whether you’re in need of shower head repair, bathtub repairs, leak repair or plumbing system maintenance, you can count on the plumbers at Mr. Rooter Plumbing to do a great job.